9
AC Pilot Indicator Light
The green AC Pilot Indicator Light comes on when the engine starts
and generates power.
CONTROL PANEL FUNCTIONS
Oil Warning
Indicator
light
Overload
Indicator
light
AC Pilot
Indicator
light
DC Circuit Breaker
When the DC Circuit Breaker is in the “ON” position, the generator is able to supply power to connected electronic devices.
When the DC Circuit Breaker is in the “OFF” position, the generator will no longer supply power. The DC Circuit Breaker
automatically turns “OFF” when connecting electronic devices to the generator that exceed the generator’s rated output. If
the DC Circuit Breaker turns off, reduce the load of connected electronic devices until the load is within the specified rated
output. To re-establish power, return the DC Circuit Breaker back to the “ON” position.
CAUTION!
rekaerB tiucriC CD eht fI turns off again, stop using the generator immediately and consult a
qualified electrician or small Engine repair shop.
Engine Economy Control
Economy Mode:
Resistive load (e.g.: TV, video game, fan, light, radio, etc.) This the quietest and most fuel efficient mode.
Standard: Best when running both conductive (motor-starting loads) and resistive (non-motor starting loads), especially
when these loads are turning on and off (example: RV, air conditioner).
Turbo: Best when running inductive loads. (appliances or equipment with motor-starting) that are continually running
(examples: drill, blender, saw, hairdryer).
Note: The engine overload indicator light may turn on for a few sec-
onds when attaching a load due to a power surge. This is normal.
Oil Warning
Indicator
light
Overload
Indicator
light
AC Pilot
Indicator
light
To Next Page
Loading...
Need help?
General
