CAUTION – Risk Of Fire Or Explosion. Flammable Refrigerant Used. Consult Repair Manual/Owner’s Guide
Before Attempting To Service This Product. All Safety Precautions Must be Followed.
CAUTION – Risk Of Fire Or Explosion Due To Puncture Of Refrigerant Tubing; Follow Handling Instructions
Carefully. Flammable Refrigerant Used.
Staple your receipt to your manual.
You will need it to obtain warranty service.
Parts and Features
1. Interior Light
2. Glass Shelves (1)
3. Bclak Wire Shelf (2)
4. Adjustable Leveling Legs
5. Touch Control Panel
6. Tinted Double Pane Glass Door
7. Drip Tray in Back (not shown)
Installing Your Beverage And Wine Center
Unpacking Your Beverage And Wine Center
1. Remove all packaging material. This includes the foam base and all adhesive tape holding the beverage and
wine center accessories inside and outside.
2. Inspect and remove any remaining packing, tape or printed materials before powering on the beverage and
wine center.
Leveling Your Beverage And Wine Center
Your beverage and wine center has two leveling legs which are located in the front corners. After properly
placing your beverage and wine center in its final position, you can level your beverage and wine center.
Leveling legs can be adjusted by turning them clockwise to lower your beverage and wine center or by turning
them counterclockwise to raise your beverage and wine center. The beverage and wine center door will close
more easily when the two front leveling legs are extended slightly.
Proper Air Circulation
To ensure that your beverage and wine center works at the
maximum efficiency it was designed for, you should install it in a location where there is proper air circulation
and electrical connections.
The following are recommended clearances around the beverage center:
To Next Page
Loading...
Need help?
General
