Toavoidpersonalinjuryorpropertydamage,handle
temperedglassshelvescarefully.Shelvesmay break suddenly
if nicked,scratched,or exposedto sudden temperature
change. Allowthe glassshelvesto stabilizeto room
Features may vary according to model.
Your refrigerator includes SpillSafeTM glass shelves that are
designed to catch and hold accidental spills.
You can easily adjust shelf positions in the fresh food
compartments to suit your needs. The shelves have
mounting brackets that attach to slotted supports at the
rear of each compartment.
To change the position of a shelf:
1 Remove all food from shelf.
2 Uft the front edge up and pull the shelf out.
3 Replace by inserting the mounting bracket hooks into
the desired support slots.
4 Lower the shelf and lock into position.
Shelf features
Drawers
Your refrigerator includes a variety of storage drawers.
These drawers are located in fixed positions at the
bottom of the fresh food compartment.
Crispers
Crisper drawers are designed for storing fruits,
vegetables, and other fresh produce.
Opening Crisper Drawer
Crisper humidity control
Crisper drawers includea sliding control for adjusting the
humidity inside the crisper. Leafy vegetables keep best
when stored with the Humidity Control set on Higher
Humidity. Fresh fruits keep best when stored with the
Humidity Control set on Lower Humidity.
Vegetables Fruits
hi ............. [o
:: : i %¸¸¸¸¸
Flip Shelf
Adjusting Crisper Humidity
TO remove the Crisper Drawer for cleaning:
:[ Pull the drawer out until it stops.
2 Lift the front slightly and remove the drawer.
iii i!iiii:ii i% i!l
Slide=Under Shelf Removing Crisper Drawer
To Next Page
Loading...
