Fryette Power Station PS 2A User Manual

3
IMPORTANT SAFETY INSTRUCTIONS
This symbol warns the user of dangerous voltage levels localized within the enclosure.
This symbol advises the user to read all accompanying literature for safe operation of the unit.
X Read, retain, and follow all instructions. Heed all warnings.
X Only connect the power supply cord to an earth grounded AC receptacle in accordance with the voltage and frequency
ratings listed under the AC input on the rear panel of this product.
X WARNING:Topreventdamage,reorshockhazard,donotexposethisunittorainormoisture.
X Unplugthepowersupplycordbeforecleaningtheunitexterior(useadampclothonly).Waituntiltheunitis
completely dry before reconnecting it to power.
X Maintain unobstructed air space behind and above the unit to allow for proper ventilation and cooling.
X This product should be located away from heat sources such as radiators, heat registers, or other products that
produce heat.
X Thisproductmaybeequippedwithapolarizedplug(onebladewiderthantheother).Thisisasafetyfeature.Ifyou
are unable to insert the plug into the outlet, contact an electrician to replace your obsolete outlet. Do not defeat the
safety purpose of this plug.
X Protect the power supply cord from being pinched or abraded.
X The power supply cord of this product should be unplugged from the outlet when left unused for a long period of
time, or during electrical storms.
X Thisproductshouldbeservicedbyqualiedservicepersonnelwhen:thepowersupplycordortheplughasbeen
damaged;orobjectshavefallen,orliquidhasbeenspilledontotheproduct;ortheproducthasbeenexposedto
rain;ortheproductdoesnotappeartooperatenormallyorexhibitsamarkedchangeinperformance;ortheproduct
has been dropped, or the enclosure damaged.
X Donotdriporsplashliquids,norplaceliquidlledcontainersontheunit.
X CAUTION:Nouserserviceablepartsinside,referservicingtoqualiedpersonnelonly.
X FRYETTE®ampliersandloudspeakersystemsarecapableofproducingveryhighsoundpressurelevelswhich
may cause temporary or permanent hearing damage. Use care when setting and adjusting volume levels during use.
X Hazardousvoltagesmaybepresentwithinthechassisevenwiththepowerswitcho󰀨andpowercordconnected.
Therefore, disconnect the power cord from the rear panel power inlet before servicing. The power inlet must remain
readily operable.
X EXTENDED USE OF YOUR AMPLIFIER AT HIGH OUTPUT POWER WILL PLACE THERMAL STRESS ON THE OUTPUT
TUBES, OUTPUT TRANSFORMER AND ASSOCIATED COMPONENTS, AND MAY RESULT IN DAMAGE TO YOUR
AMPLIFIER. OLDER AMPLIFIERS MAY HAVE CRITICAL COMPONENTS WHICH HAVE DETERIORATED OVER TIME,
SUCH AS COUPLING AND FILTER CAPACITORS, WIRING INSULATION, TUBE SOCKETS, GRID RESISTORS, AND
THE INTERNAL INSULATION OF THE OUTPUT TRANSFORMER WINDINGS. THESE COMPONENTS MAY BE EXCESSIVELY
STRESSED UNDER SUSTAINED HIGH POWER OPERATION AND MAY FAIL IF NOT PROPERLY USED AND MAINTAINED.
X PLEASE CHECK THE CONDITION OF YOUR OUTPUT TUBES, AND REPLACE THEM IF THEY ARE OLD OR FRAGILE
BEFORE USING THE AMPLIFIER AT HIGH POWER LEVELS WITH THE POWER STATION CONNECTED. OUTPUT
TUBES CAN EASILY FAIL WHEN STRESSED. CATASTROPHIC TUBE FAILURE CAN ALSO DAMAGE OTHER COMPONENTS
SUCH AS THE OUTPUT TRANSFORMER.
X THE POWER STATION IS NOT INTENDED FOR USE WITH SOLID STATE AMPLIFIERS THAT USE CURRENT FEEDBACK
AND AN UNGROUNDED OUTPUT. USING THE POWER STATION WITH SUCH PRODUCTS MAY CAUSE OSCILLATION
AND POTENTIAL DAMAGE TO THE AMPLIFIER.
X THE POWER STATION IS NOT INTENDED FOR USE WITH CLASS D OR PWM AMPLIFIERS.
X FRYETTE AMPLIFICATION IS NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR AMPLIFIER THAT MAY OCCUR IN
CONNECTION WITH ANY USE OF THE POWER STATION.

Fryette Power Station PS 2A Specifications

General

Brand	Fryette
Model	Power Station PS 2A
Category	Amplifier
Language	English