FS N Series User Manual

For Technical Support: www.fs.com/service.html17
Caution!
Please verify the sign
above the port to ensure using the other ports. Connecting to wrong ports might damage the
transceiver or the other ports
. When connecting other devices through a fiber cable to the switch, the output power of
the fiber c
able must not exceed the maximum received power of the corresponding modules. Otherwise,it will dama
ge
the fiber transceiver. Do not stare at the fiber bore when the switch is in operation. That may hurt your eyes.
Figure 6-6 Connect the DAC Cable to N8000-32Q Switch
The connection approach of DAC cable is below:
(1) Connect the two side of DAC c
able to QSFP+ transceiver of N8000-32Q switch.
(2) Check out the indic
ator light state of the light port. If LINK light is bright, it means the link is connection.
If LINK light
puts out, it means the lines have trouble and please check out the line connection.

FS N Series Specifications

General

Brand	FS
Model	N Series
Category	Switch
Language	English