FS N Series User Manual

For Technical Support: www.fs.com/service.html
18
6.2.7 AC Power Supply Connection
N8000-32Q uses 220VAC power supply by default. Please read the power input specification for the detailed
information.
Figure 6-7 Connect the Power Supply Cable to the N8000-32Q Switch
AC Power supply connection procedure is described as below:
(1) Insert one end of the power c
able provided in the accessory kit into power source socket, and the other end to
the power socket (with overload and leak
age protection).
(2) Check the power st
atus indicator in the front panel of the switch. The corresponding PWR indicator should light.
N8000-32Q is self-adjust
able for the input voltage. As soon as the input voltage is in the range printed on the
switch surface
, the switch can operate correctly.
(3) When the switch is powered on, it executes self-test procedure and startups.
Caution!
The input voltage must be within the required range, otherwise the switch can be damaged or malfunction.
Do not open the switch shell without permission. It can cause physical injury.
Disconnect all power supply cords before servicing.

FS N Series Specifications

General

Brand	FS
Model	N Series
Category	Switch
Language	English