Fuji Xerox DocuPrint C3290 FS User Manual

Adjusting Scanning Options
7-18
Adjusting Scanning Options
This section includes:
■ Adjusting the Default Scan Settings on page 7-18
■ Changing the Scan Settings for an Individual Job on page 7-21
Adjusting the Default Scan Settings
This section includes:
■ Setting the Color Mode on page 7-18
■ Setting the Scan Resolution on page 7-19
■ Setting the Original Type on page 7-19
■ Setting the Scanned Image File Type on page 7-20
■ Setting the Original Size on page 7-20
■ Automatically Suppressing Background Variations on page 7-20
For a complete list of all of the default settings, see Default Settings on page 9-4.
Setting the Color Mode
You can scan an image in color or in black-and-white. Selecting black-and-white significantly reduces the
file size of the scanned images. An image scanned in color will have a larger file size than the same image
scanned in black-and-white.
1. Press the System button.
2. Select
Default Settings, and then press the OK button.
3. Select
Scan Defaults, and then press the OK button.
4. Select
Color, and then press the OK button.
5. Change the color setting to either
Color or Black&White, and then press the OK button.
To change the color mode temporarily, press the Color Mode button on the control panel.
Copy
Fax
E-mail
Scan
Color Mode
B&W
Color
OK
Job in Memory
Job Status
ABC
GHI
PQRS
Redial/
Pause
Speed Dial
-_~
TUV WXYZ
JKL MNO
@:./
123
4
56
7
8
0
C
#
9
DEF
System
Manual Dial

Fuji Xerox DocuPrint C3290 FS Specifications

General

Brand	Fuji Xerox
Model	DocuPrint C3290 FS
Category	All in One Printer
Language	English