Fuji Xerox DocuPrint M225 z User Manual

Choose the Correct Receive Mode
Related Models:
DocuPrint M225 z
You must choose a Receive Mode depending on the external devices and telephone services
you have on your line.
By default, your machine will automatically receive any faxes that are sent to it. The diagram
below will help you select the correct mode.
Do you want to use the telephone feature of your machine (if
available), an external telephone or external telephone answering
device connected on the same line as the machine?
No
Fax Only Mode
Yes
Are you using the voice message function of an external telephone
answering device?
Yes
External TAD
Mode
No
Do you want the machine to answer fax and telephone calls
automatically?
Yes
Fax/Tel Mode
No
Manual Mode
1
Press Menu.
2
Press a or b to display the Fax
option, and then press OK.
3
Press a or b to display the Setup Receive option, and then press OK.
4
Press a or b to display the Receive Mode option, and then press OK.
If you cannot change the Receive Mode, make sure the Distinctive Ring
1
feature is set to
Of
f.
5
Press a or b to select the Fax only, Fax/Tel, External TAD, or Manual option, and
then press OK.
6
Press Stop/Exit.
1
Fax Ability in New Zealand.
6
Fax
31

Fuji Xerox DocuPrint M225 z Specifications

General

Brand	Fuji Xerox
Model	DocuPrint M225 z
Category	Printer
Language	English