Fuji Xerox DocuPrint P375 dw User Manual

96
Home > Network > Additional Methods of Configuring Your Fuji Xerox Machine for a Wireless Network >
Configure Your Machine for a Wireless Network When the SSID Is Not Broadcast
Configure Your Machine for a Wireless Network When the SSID Is Not
Broadcast
1. Check and record the current wireless network settings.
For example:
If your router uses WEP encryption, enter the key used as the first WEP key. Your Fuji Xerox machine
supports the use of the first WEP key only.
2. Press ▲ or ▼ to select the [Network] option, and then press OK.
3. Press ▲ or ▼ to select the [WLAN] option, and then press OK.
4. Press ▲ or ▼ to select the [Setup Wizard] option, and then press OK.
5. When [WLAN Enable?] appears, press ▲ to select On.
This will start the wireless setup wizard. To cancel, press Cancel.
6. The machine will search for your network and display a list of available SSIDs. Press ▲ or ▼ to select the
[<New SSID>] option, and then press OK.
7. Enter the SSID name, and then press OK.
8. Press ▲ or ▼ to select the [Infrastructure] option, and then press OK.
9. Press ▲ or ▼ to select the Authentication Method you want, and then press OK.
10. Do one of the following:
Related Models:DocuPrint P385 dw/DocuPrint P375 dw
Before configuring your machine, we recommend writing down your wireless network settings. You will need
this information before you continue with the configuration.
Network Name (SSID)
Communication Mode Authentication Method Encryption Mode Network Key
Infrastructure Open System NONE -
WEP
Shared Key WEP
WPA/WPA2-PSK AES
TKIP
(TKIP is supported for
WPA-PSK only.)
Network Name (SSID)
HELLO
Communication Mode Authentication Method Encryption Mode Network Key
Infrastructure WPA2-PSK AES 12345678

Fuji Xerox DocuPrint P375 dw Specifications

General

Brand	Fuji Xerox
Model	DocuPrint P375 dw
Category	Printer
Language	English