Getting s tarted
Removing monitor base
Before you can use a swivel arm or a similar accessory, you must remove the monitor b ase .
The display surface is susceptible to scratching!
1
2
3
► Switch off the monitor and pull the power
plug out of the power socket.
► Lay the monitor on its face on a soft surface.
► Remove the cover and disconnect all cables.
► Release the base stan d by pressing the
slider down (1). Move it in the direction of the
arrow (2) and lift the base stand upwards (3).
You can now mount a swivel arm or a
similar accessory in accordance with VESA
FPMPMI using a hole spacing of 100 mm.
For instructi
ons on how to mount t he s wivel arm or a similar accessory, please
see the docume
ntation for the swivel arm or similar accessory.
16 Fujitsu
To Next Page
Loading...
Need help?
General