Your LCD screen ...
Your LCD screen...
has a whole range of useful feature s and functions, e.g.:
• TFT display (Thin Film Transistor; active ma trix)
• minimal space requirement
s thanks to slim c asing
• optimum ergonomic cha racteristics (totally distortion-free, excellent picture
definition and co lour purity right into the corners)
• high degree of brightne
ss and good co ntrast
• high resolution (1680 x 1050)
• presentation of up to 1
6.7 million colours (in conjunction with an appropriate disp lay adapter)
• automatic scanning of horizontal frequencies from 30 to 82 kHz and refresh rates
(vertical frequencies) from 56 to 76 Hz (absolutely flicker-free)
• Digital screen co ntr
oller with microprocessor for storing 40 different display modes
• freely adjustable colour alignment for matching the screen colours to the
colours of various input and output devices
• convenient opera
tion via integrated OSD (On-Screen-display) menu
• VESA-DDC compatibility
• VESA-FPMPMI com
patibility (Flat Panel Monitor Physical Mounting Interface) –
Mounting device
for swivel arm or a similar accessory
• Plug&Play capability
• digital video
inputs (DVI and DisplayPort) with HD CP
• power management for reducing powe r consumption when the computer is not in use
• Compliance w
ith the recommendations according to TCO 6.0
• the monitor fu lfills all GS ("Geprüfte Sicherheit", Certified Security) requireme nts.
This operat
ing manual contains important information you require to start up and run your LCD monitor.
A graphics c
ard (display adapter) with a VGA interface or a digital graphics card with a DVI
or Display
Port interface is required to co ntrol the LCD monitor. The monitor processes the
data suppl
ied to it by the graphics card. The graphics card or th e associated driver software
is respon
sible for setting the modes (resolution and refresh rate).
When putt
ing the monitor into operation for the first time, the screen display should b e
optimal
ly adapted to the d isplay adapter used and adjusted in accordance with your
needs (s
ee chapter "
Changing the monito r settings", Page 21).
Target group
You don’t need to be an "expert" to pe rform the operations described here.
Nonetheless, it is important to always observe the safety notes given in the operating
instructions for th e computer and in this manual.
In the event of any problems, please c ontact your sales office or our Service Desk.
Fujitsu 5
To Next Page
Loading...
Need help?
General