Getting started
► Connect one of the connectors of the data cable to the D-SUB socket or the DVI-D socket or the
DP socket of the monitor and secure the plug connection by tightening the retaining screws.
The monitor automatically detects the input when only one signal source is connected.
► Insert one plug of the audio line in the AUDIO IN socket on the monitor
and make sure it is properly eng aged.
► Plug the power cable supplied into th e power connector of the monitor.
► Plug the supplied USB cable into th e USB IN socket and the other end of
the cable into a USB s ocket of the computer.
Connect the USB keyboard a nd USB m ouse directly to the PC, as the USB connector
socket of the monitor is switched off in energy-saving mode.
► Secure th e cover over the connections.
A lock (Kensington Lock) can be mounted in the security slot to prot ect the m onitor
against theft. A K ensington lock is not supplied with the monitor.
Connecting cables to the computer
Information on th e compu ter connections and interfaces is c onta ined in the
operating m anual for your computer.
► Connect the data cable to the (active) monitor port on the computer and secure
the plug-in connection by tightening the safety screws.
► Insert the o ther plug of the audio cable in the audio output of the computer.
► Plug the power connector of the monitor into a properly gro unded mains outlet.
► Plug the power connector of the computer into a properly grounded mains outlet.
If your computer has two monitor ports ("onboard" screen controller and separate
graphics card), the monitor port for the separate graph ics card is active as standard.
Fujitsu Technology Solutions 17
Downloaded from ManualMonitor.com Manuals
To Next Page
Loading...
Need help?
General