Fujitsu B23T-6 LED User Manual

Troubleshooting
Having this problem? Check the following po int s:
No screen display
Power indicator do es not light up
► Check whether the power cable on
the
monitor is connected correctly
.
► Check whether the computer is switched on.
No screen display
Power indicator is lit
► Check whether the computer is switched on.
► Ch eck whether the data cable for the
monitor is corre ctly attached to the monitor
port on the computer.
► Pre ss any key on the computer ke ybo a rd.
The computer may be in power saving
mode.
► Alter the brightness and/or co ntrast until you
get a picture.
Message: No Signal
► Ch eck whether the data cable for the
monitor is corre ctly attached to the monitor
port on the computer.
► Check whether the computer is switched on.
Message: Frequency out of range
:## kHz / ## Hz
Please change the display mode
to 1920 x 1080 with 60 Hz
The input signal (horizontal frequen cy and
refresh rate) at the displayed input does not
correspond to the technical data for the monitor.
► Adjust the video frequency range using the
computer software (see documentation for
the computer or display adapter).
► Set a different
screen resolution using the
computer soft
ware (see documentation for
the computer o
r display adapter).
Picture posi
tion not correct
The monitor recognises an undefined mode (see
chapter "
Technical s pecification", Page 32).
► Press the
AUTO
button to conduct the
auto-adjustment of the screen.
Picture is shaking
► Ch eck whether the data cable for the
monitor is corre ctly attached to the monitor
port on the computer.
► Press the
AUTO
button to conduct the
auto-adjustment of the screen.
Picture is wrongly adjusted
► Run the Factory Recall function in the OSD
menu.
The Aut
o Processing message appears.
Picture disturba n ces (ve rti cal lines)
► Press
the
AUTO
button to conduct the
auto-
adjustment of the screen.
Picture disturbances (horizontal lines, picture
noise)
► Pres
sthe
AUTO
button to conduct the
aut
o-adjustment of the screen.
The screen becomes darker
The backgroun d lighting has a limited lifetime.
If your monitor display should become too dark,
the background lig hting will have to be replaced.
► Contact our Service Desk.
30 Fujitsu Technology Solutions
Downloaded from ManualMonitor.com Manuals

Fujitsu B23T-6 LED Specifications

General

Brand	Fujitsu
Model	B23T-6 LED
Category	Monitor
Language	English