Getting started
Adjusting the inclination
The inclination of the monitor can be adjusted by -3° (forwards) and +35°
(backwards) from its vertical position.
► Hold the monitor with both hands on the left and right sides of the case and move
it to the desired angle (3, see "
Adjusting height", Page 14).
Adjusting the rotation
The monitor can be rotate
d by ±172°.
► Grasp the monitor with bo
th hands on the right and left edge of the casing
and turn it to the desire
d position.
Adjusting portrait format
The monitor can be rotated from horizontal format (landsca pe mode) into
vertical format (portra it m ode).
► Grasp th e monitor with both hands on the right and left edge of the casing, move it into
the highest position and turn it clockwise until it is in the portrait position.
► To set the screen back into landscape mode, rotate it back anti-clockwise.
The screen supports the "Autorotation" function with the associated software
(DisplayView), which is used to adapt the display to the orientation of the screen
(see "
Notes on the p rogram "DisplayView"", Page 36).
For you to be ab
le to display the screen con tents in portrait mode, your graphics card
will also need
to support this function or you will need to use s pecial software.
In the OSD men
u you have the option of switching the OSD manually from landscape
mode to portr
ait mode (see "
Functio ns of the control panel and the OSD menu", Page 21).
To r es e t t he
monitor to landscape mode, the monitor should be turned an ti-clockwise.
The OSD dis
play can be rese t a gain in the O SD menu.
Fujitsu 15
To Next Page
Loading...
Need help?
General