Getting started
Connecting the device
Please observe th e safety information in "Important notes", Page 7.
CE conformance and optimum picture quality are guaranteed only if
you use the data cables supplied.
► Switch off the monitor and the computer.
► Disconnect the power plug
from the computer.
Connecting cables to the monitor
The data cables sup plied have two 20-pin DP connectors for connection to
the monitor and to the computer.
Information on the compu ter connections and interfaces is contained in the
operating manual for the compute r.
9
1
4 5 632 8
7
1=Powersocket
2 = Display port socket
3 = HDMI socket
4 = D-SUB socket (VGA)
5 = AUDIO-IN socket
6 = AUDI O- OUT socket
7 = USB 3.0 (Upstream)
8 = USB 3.0 (Downstream)
9 = Security slot for Security Lock
► Select the appropriate data cable for your computer.
Fujitsu 17
To Next Page
Loading...
Need help?
General