4 - English Installing/removing the
processor
Installing/removing the proc
essor
Disconnect t he system from the mains voltage be fore performing a ny of the tasks
described below. Details are contained in the operating manual of you r system.
Technical data
• Socket LGA775, max. 95W
• A current list of the processors supported by this mainboard is available on the
Internet at: "
http://ts.fujitsu.com/m ainboards".
Never touch the underside of the processor. Even minor soiling s uch as grease
from the skin can impair the processo r’s operation or destroy the processor.
Place the processor in the socket w ith extreme care, as the spring contacts
of the socket are very delicate and must not be bent.
If one or more spring contacts are bent, on no account insert th e processor as it
may be damaged by doing so. Please c ontact the responsible vendor.
22 Fujitsu Technology Solutions
To Next Page
Loading...
Need help?
General
