Fujitsu D3162 User Manual

Installing/removin g m ain memory En
glish - 7
Installing/removing main mem
ory
Tech nic al data
Technology
DDR3 1333/1600 MHz unbuffered DIMM modules 240 pin; 1.5 V;
64 bit, no ECC
Tota l size
1to32GByteDDR3
Module size
1, 2, 4 or 8 GByte per module
A curren t list of the memory modules re commended for this mainboard is ava ilable
on the Internet at: "
http://ts.fujitsu.com/mainb oards".
At least one memory module mu st be installed. Memo ry modules with different
memory capacities can be combined.
Only unbuffered DDR3 memory mod ules without ECC may be used .
DDR3 memory m odules must comply with the PC3-10600 or PC3 -12800 speci fication.
If you use more than one memory module, then make sure to distribute the
memory modules over both memory channels. By doing this you use the
performance advantages of the dual-channel mode.
Maximum syste m performance is achieved when identical memory modules
are used in Cha nnel A and Channel B.
To simplify equipping, the slots are colour code d.
Depending on how th e syste m is con figured, the visible m ain memory c an be reduced.
Channel B, Slot 2
Channel B, Slot 4
Channel A, Slot 1
Channel A, Slot 3
Number of m
emory modules inserted
Slot to be used 1 2 3 4
Channel A, slot 1
xxxx
Channel
B, slot 2
xxx
Channel A, slot 3
xx
Channel B, Slot 4
x
The i
nstallation/removal is described in the "Basic information on mainboard" manual.
Fujitsu Technology Solutions 21

Fujitsu D3162 Specifications

General

Brand	Fujitsu
Model	D3162
Category	Motherboard
Language	English