Operation
Function Description
Call Indicator
Enable/disable call display
This function shows the st atus of the user of the communica tion software
(e. g. Microsoft Lync / Skype for Business) via the LED on to p of the monitor.
Incoming calls are indicated audibly by the communication software using
the monitor speakers.
This function is only available if your model has a call indicator display and
the c ommunication software being used supports status transmission.
Daisy Chain
Enable/disable daisy cha
ining via Displayport.
This function allows the
desktop to be exten ded onto a monitor connected
via "DP OUT".
This option only appe ar
s if your model supports daisy chain and display port
or U SB-C is selected as i
nput signal.
Overdrive
Enable/disable enh anced reaction time
This function can be used to improve the focus in fast moving images.
This setting can only be configured in Video or Custom application mode.
DDC-CI
Enable/disable Display Data Channel - Command Interface
This function allows data to be exchanged via the connection between the
PC and the display.
Status LED
Enable/disable
Status LED
This function a
llows the power i ndicator o n the monitor to be switched on
or off.
Factory reca
ll
Activate the factory settings
With this function all settings are reset to the factory settings.
► Press the
button to run the function.
► Press the
button to confirm or the button to cancel.
The langua
ge selection menu appears.
WithaVGA
data cable, the message Auto Processing is displayed.
Display
ing information
► Press the button to call up the main menu.
► Press t
he
button to call up the Information window.
Details such as the model designation, serial number, resolution, H/V
frequency and ECO mode are displayed.
26 Fujitsu
To Next Page
Loading...
Need help?
General