Getting s tarted
► Connect one of th e connectors of the data cable to the D-SUB socket or the DVI-D socket or the
HDMI socket of the monitor and secure the plug connection by tightening th e retaining screws.
The monitor automatically detects the input w hen only one signal source is connected.
► Insert one plug of the audio line in the AUDIO IN socket on the monito r
and make sure it is properly engage d.
► Plug the po wer cable supplied into the power connector of the mo nitor.
A lock ( Se curity Lock) can be mounted in the secu rity slot to protect the monitor
against theft. A Security Lock is not included with the monitor at delivery.
Connecting cables to the computer
Information on the computer con nections and interfaces is contained in the
operating m anual for your computer.
► Connect the data cable to the (active) monitor port on the computer and secure
the plug-in connection by tightening the safety screws.
► Insert the other plug of the au dio cable in the audio output of the computer.
► Plug the power connector of the monitor into a properly grounded mains outlet.
► Plug the power connector of the computer into a properly grounded mains outlet.
If your computer has two monitor po rts ("onboard" screen controller and sep arate
graphics card), the monitor port for the separate graphics card is active as standard.
18 Fujitsu
To Next Page
Loading...
Need help?
General