Fujitsu E22T-7 LED User Manual

Notes on ergonomic colour adjust men
t
Notes on ergonomic colour adju
stment
If you select colours for the monitor in y our application programmes,
take note of the information below.
The primary colours blue and red on a dark background do not produce the minimum
required con trast of 3:1 and are therefore not suitable for continuous text and data entry.
When using several colours for characters and background and giving the primary colours full
modulation, you can obtain very suitable colour combinations (see the following table):
Characters
Background
black white purple blue
cyan green
yellow red
black
++
-
+++
-
white
+++
---
+
purple
++
-----
blue
-
+
-
+
-
+
-
cyan
+
--
+
---
green
+
--
+
---
yellow
+
-
++
--
+
red
-
+
----
+
+ C olour combination v ery suitable
- Colour combination not suitable because colour h ues are too close together, thin characters
are not identifiable or rigorous focusing is demanded of the human eye.
Fujitsu 29

Fujitsu E22T-7 LED Specifications

General

Brand	Fujitsu
Model	E22T-7 LED
Category	Monitor
Language	English