Fujitsu fi-60F User Manual

1.3 How to Use the Scanner Driver
fi-60F Image Scanner Operator’s Guide 11
BASIC SCANNER OPERATIONS
1
■ ISIS Scanner Driver
ISIS Scanner Driver is designed for scanning documents with FUJITSU image scanner fi series by
using application software that complies with The ISIS standard.
The following describes the procedure with examples of QuickScan for ordinary scanning by using
this driver software.
The procedure may vary depending on your application. If you use an application other than
QuickScan, please refer to its Guide or Help for further information.
Using the ISIS Scanner Driver for Scanning
1) Startup the application.
From the [Start] menu, select [All Programs] -[EMC Captiva] - [QuickScan] and click
[QuickScan].
2) Select your scanner on the window below.
Select [Scan] - [Select Scanner] on the menu bar.
3) Select [Fujitsu fi-60F], then click the [OK] button.
4) Select [Scan] - [New Batch] on the menu bar.

Fujitsu fi-60F Specifications

General

Brand	Fujitsu
Model	fi-60F
Category	Scanner
Language	English