Using On Screen Display (OSD) functions
Adjusting the colour
Selects the
color to improve brightness and colour saturation
between 9300K, 6300K, 5400K and customer colour.
9300K Adds more blue to the picture, for a cooler white.
6300K Adds more red to the picture, for a warmer white and richer
reds.
5400K Adds more green to the picture, for darker tones.
Customer color Individual adjustments for red (R), green (G), blue (B).
► Press button 2 to select the desired colour.
► Press the ▲ or ▼ button to adjust the selected colour.
Displaying information
Displays the
information regarding the current input signal
coming from the graphic card in your computer.
Note: See your graphic card user guide for more information
about changing the resolution and refresh rate.
Adjusting the image
Manually adjusts the H./V. position, horizontal size, phase,
sharpness, expansion and mode
H./V. Position Adjusts the horizontal and vertical position of the image.
H. Position ▲: Move screen to the right.
▼: Move screen to the left.
V. Position ▲: Move screen up.
▼: Move screen down.
Horizontal size Adjusts the width of the screen image.
▲: Increase the width of screen image.
▼: Decrease the width of screen image.
Phase Adjusts the delay time of data and clock.
Press ▲ or ▼ to adjust to your preference.
Sharpness Adjusts the clarity of a non-Full HD resolution (1920 x 1080)
signal with the ▲ or ▼ button.
Expansion Toggles the video mode between Full Screen or Aspect
Ratio
Full Screen Selects full-screen image.
KeepAspect Selects input timing image size.
Fujitsu 11
To Next Page
Loading...
Need help?
General