Working with the notebook
Loudspeakers and microphones
MicrophoneLoudspeakersBassloudspeak er(subwoo fer)Volum ec ont rol
You will find information about the exact position of speakers and microphon es
in chapter "
Ports and controls " , Page 9.
Please refer to chapter "
Key c ombin ations", Pag e 24 for informat ion on setting th e v olume
and also enabling/disabling the loudspeakers using key com binations.
If you attach an external microphone, the built-in m icroph one is disabled.
When you connect headp hones or ext ernal speakers, th e built-in spe akers are disabled.
Information on connecting headphones and a microphone can be found
in "
Connecting exter nal devices", Page 43.
Wireless LAN / Bluetooth
The installation of radio components not approved by Fujitsu will invalidate
the certi fications issued for this device.
Switching the wireless components on a nd off
► Press the key combination
Fn
+
F5
to start the WirelessSelector.
WirelessLANWirelessLANBluetoothBluetooth
The wireless component indicator will illuminate when on e or more wireless
components are switched on.
The Bluetooth module and the wireless LAN tra nsmission unit (antenna) will
be switched off when you switch off the radio compo nents.
Pay attent ion to the additional safety notes for devices with wireless
components provided in the "Safety" manual.
Details on using a Wireless LAN can be found in the online help system
included in the W ireless LAN software.
Setting up WLAN acc ess
• Requirement: A WLAN must be available and you must have the
corresponding a ccess information.
Information on config uring the WLAN access can be found in the
documentation for your operating system.
Fujitsu 37
To Next Page
Loading...
Need help?
General