xiv
Before moving the scanner, disconnect the power plug from the
power outlet.
Protect the sccanner from static electricity.
Be careful not to get neckties, necklaces, hair, etc. entangled in
the scanner.
Disconnect the power plug from the power outlet when the
scanner is not used for a long period of time.
Do not install the scanner in direct sunlight.
Do not move the scanner with the power and interface cables
connected as this might damage the cables, causing fire, electric
shock or injuries. Before moving the scanner, be sure to disconnect
the power plug from the power outlet, and disconnect data cables.
Also, make sure that the floor is free of obstructions.
Install the scanner away from strong magnetic fields and other
sources of interference. Also, protect the scanner from static
electricity as this might cause the scanner to malfunction.
You may get injured if your clothing, neckties, or hair, etc. is
entangled in the moving components such as gears and rollers.
When the scanner is not used for a long period of time, be sure to
disconnect the power plug from the power outlet for safety.
Do not install the scanner in the direct sunlight or near heating
apparatus. Doing so might cause excessive heat to build up inside
the sanner, causing fire or scanner trouble. Install the scanner in a
well-ventilated location.
To Next Page
Loading...
Need help?
General