6.4 Cleaning the server node
V CAUTION!
Switch the server node off and disconnect the power plugs from the
properly grounded power outlets.
Do not clean any interior parts yourself; leave this job to a service
technician.
Do not use any cleaning agents that contain abrasives or may corrode
plastic.
Ensure that no liquid enters the system. Ensure that the ventilation areas
of the server node and the monitor are clear.
Do not use any cleaning sprays (including flammable types). It may
cause a device failure or a fire.
Clean the keyboard and the mouse with a disinfecting cloth.
Wipe the server node and monitor casing with a dry cloth. If particularly dirty,
use a cloth that has been moistened in a mild domestic detergent and then
carefully wrung out.
To Next Page
Loading...
Need help?
General