RX1330 M1
Operating Manual 31
3 Installation steps, overview
This chapter contains an overview of the steps necessary to install your server.
Links guide you to sections where you can find more detailed information on the
individual steps:
Ê First of all, it is essential that you familiarize yourself with the safety
information in chapter "Important information" on page 33.
Ê Transport the server to the place where you want to set it up.
Ê Unpack all parts, check the contents of the package for visible transport
damage and check whether the items delivered match the details on the
delivery note (see section "Unpacking the server" on page 48).
Ê Make sure that all necessary manuals (see "Documentation overview" on
page 12) are available; print out the PDF files if required.
Ê Components that have been ordered additionally may be delivered loose
with the server. Install these in the server as described in the supplied
documentation.
Ê Install the server in the rack (see section "Installing/removing the server
in/from the rack" on page 49).
Ê Wire the server. Follow the instructions in sections "Connecting devices to
the server" on page 51 and "Notes on connecting/disconnecting cables" on
page 57.
Ê Connect the server to the mains (see section "Connecting the server to the
mains" on page 54).
Ê Familiarize yourself with the controls and indicators on the front and rear of
the server (see section "Control elements and indicators" on page 59).
Ê Configure the server and install the desired operating system and
applications. The following options are available:
– Remote installation with the ServerView Installation Manager:
With the ServerView Suite DVD provided, you can configure the server
and install the operating system in a convenient manner.
To Next Page
Loading...
Need help?
General