72 Operating Manual TX100 S3 Core Edition
Starting up and operation
Ê Select Reinstall Windows from the Recovery section in the Maintenance and
Recovery Manager menu.
V CAUTION!
– Please note that all data on the primary partition of your hard disk
drive will be lost!
– Once the installation has been started, the device must not be
switched off unless the DVD tray opens, indicating that the
installation process is complete.
I The recovery installation will be performed completely unattended.
The server will reboot several times during the process. The VNC
connection will be closed upon the first reboot and cannot be re-
established until the installation is complete.
Ê Click Yes to choose a Japanese
user interface and software
environment after the installation
process is complete.
Click No for the default English
user interface environment.
Ê In order to initiate the installation process, confirm the warning message.
Ê Wait until the DVD tray opens, indicating that the installation process is
complete. This will take about 45 minutes.
Ê Remove the Maintenance & Recovery DVD and close the DVD tray.
Ê Perform steps 3 through 5 in section "Initial operation" on page 48 in order
to finalize the operating system installation and starting up your server.
To Next Page
Loading...
Need help?
General