Fujitsu PRIMERGY TX100 S3 Core Edition User Manual

TX100 S3 Core Edition Operating Manual 81
8 Troubleshooting and tips
V CAUTION!
Follow the safety instructions in the "Safety notes and regulations"
manual or " 安全上のご注意 " and in chapter "Important information" on
page 25.
If a fault occurs, attempt to resolve it using the measures described:
– in this chapter,
– in the documentation for the connected devices,
– in the help systems of the software used.
If you fail to correct the problem, proceed as follows:
Ê Make a list of the steps performed and the circumstances that led to the fault.
Also make a list of any error messages that were displayed.
Ê Switch off the server.
Ê Contact the Fujitsu Technology Solutions customer service team.
8.1 Power-on indicator remains dark
The power-on indicator remains dark after you switch on your device.
Power cords connected incorrectly
Ê Make sure that the power cord is correctly connected to the server and the
grounded power outlet. For further information, refer to section "Connecting
the server to the mains" on page 41.
Power supply overloaded
Ê Disconnect the server power plug from the grounded power outlet.
Ê Wait a few minutes before you reconnect the power plug to the grounded
power outlet.
Ê Switch on your server.

Fujitsu PRIMERGY TX100 S3 Core Edition Specifications

General

Brand	Fujitsu
Model	PRIMERGY TX100 S3 Core Edition
Category	Server
Language	English