Fujitsu PRIMERGY TX100 S3 Core Edition User Manual

TX100 S3 Core Edition Operating Manual 77
Starting up and operation
– Power button override
The system can be switched off by pressing and holding down the On/Off
button (for approximately 5 seconds). The system remains in Off state.
V CAUTION!
There is a risk that data may be lost.
6.9 Cleaning the server
V CAUTION!
– Switch the server off and disconnect the power plugs from the
properly grounded power outlets.
– Do not clean any interior parts yourself; leave this job to a service
technician.
– Do not use any cleaning agents that contain abrasives or may
corrode plastic.
– Ensure that no liquid enters the system. Ensure that the ventilation
areas of the server and the monitor are clear.
– Do not use any cleaning sprays (including flammable types). It may
cause a device failure or a fire.
Wipe the server with a dry cloth. If particularly dirty, use a cloth that has been
moistened in a mild domestic detergent and then carefully wrung out.

Fujitsu PRIMERGY TX100 S3 Core Edition Specifications

General

Brand	Fujitsu
Model	PRIMERGY TX100 S3 Core Edition
Category	Server
Language	English