Fujitsu ScanSnap S1300 Safety Precautions

2
Warning Indications Used in This Document
The following indications are used in this document to obviate any chance of accident or damage to you
and/or this product.
For Safe Use
The following describes important warnings for using this product.
For the safe use of this product, make sure to follow the following descriptions. In the following warnings,
"power cable" may refer to the AC cable connected to the AC adapter collectively.
Warning Indication Description
This indication alerts operators to an operation that, if not strictly observed, may
result in severe injury or death.
This indication alerts operators to an operation that, if not strictly observed, may
result in safety hazards to personnel or damage to the product.
A TRIANGLE symbol indicates that special care and attention is required.
The drawing inside the triangle shows the specific caution.
A CIRCLE with a diagonal line inside shows actions which users should not
perform.
It may also have a drawing inside which shows the specific action that is not
allowed.
A white exclamation mark on black background show instructions users should
follow.
It may also include the drawing that shows the specific instruction.
Do not insert or drop any foreign objects (water, liquids, small metal objects, etc.) into the
opening sections on the ScanSnap.
If foreign objects get inside the ScanSnap, immediately turn off the ScanSnap, and disconnect
the power cable from the AC outlet or the USB bus power cable from the computer.
Then, contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service
provider. Pay particular attention to this warning in households where there are small children.
If the ScanSnap is damaged for any reason, immediately disconnect the power cable from the
AC outlet or the USB bus power cable from the computer. Then, contact your FUJITSU
scanner dealer or an authorized FUJITSU scanner service provider.
WARNING
CAUTION
WARNING

Fujitsu ScanSnap S1300 Specifications

General

Film scanning	No
Color scanning	Yes
Maximum scan size	216 x 360 mm
Scanner type	Sheet-fed scanner
Sensor type	CIS
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	10 sheets
USB version	2.0
Standard interfaces	USB 2.0
Scan media weight	64 - 104.7 g/m²
Dimensions (WxDxH)	284 x 99 x 77 mm
Power requirements	AC 100 - 240V, 50/ 60 Hz
Non-operating relative humidity (non-condensing)	20 - 80 %
Minimum RAM	512 MB
Minimum storage drive space	2197 MB
Sustainability certificates	ENERGY STAR
Power consumption (standby)	5 W
Power consumption (typical)	9 W
Operating temperature (T-T)	5 - 35 °C
Certification	RoHS

Weight and Dimensions

Depth	99 mm
Width	284 mm
Height	77 mm
Weight	1400 g