Fujitsu ScanSnap S1300 Safety Precautions

9
Maintenance
The user must not perform repairs on the ScanSnap.
Contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider to make
repairs to the ScanSnap.
Contact for Inquiries
Refer to the contact list on the last page of this document.
Notice
z Copying of the contents of this document in whole or in part and copying of the scanner application
is prohibited under the copyright law.
z The contents of this document are subject to change without notice.
Bescheinigung des Herstellers/Importeurs
Für den Scanner wird folgendes bescheinigt:
z In Übereinsstimmung mit den Bestimmungen der EN45014(CE) funkentstört
z Maschinenlärminformationsverordnung 3. GPSGV: Der höchste Schalldruckpegel beträgt 70 dB (A)
oder weniger, gemäß EN ISO 7779.
Dieses Gerät wurde nicht für die Benutzung in unmittelbarer Umgebung starker Lichtquellen (z. B.
Projektoren) konzipiert.
For ScanSnap S1300 Users
Safety Standards for LED Products
This product is classified as a Class 1 LED product, which conforms to IEC 60825-1, an international
standard for laser products, and EN 60825-1, a standard adopted by CENELEC (Comité Européen de
Normalisation Électrotechnique).
Green Product Development
PFU LIMITED has proudly produced this eco-friendly product which passes our
internal criteria, "Green Product Evaluation Standard", including green
implementation such as recycling, energy reduction, and eco-friendly parts usage.
For more details, refer to "Environment" on the Fujitsu Web site.
http://www.fujitsu.com/global/about/environment/
ENERGY STAR
®
PFU Limited, a Fujitsu company, has determined that this product meets the
ENERGY STAR
®
guidelines for energy efficiency.
ENERGY STAR
®
is a registered trademark of the United States.
Class 1 LED Product

Fujitsu ScanSnap S1300 Specifications

General

Film scanning	No
Color scanning	Yes
Maximum scan size	216 x 360 mm
Scanner type	Sheet-fed scanner
Sensor type	CIS
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	10 sheets
USB version	2.0
Standard interfaces	USB 2.0
Scan media weight	64 - 104.7 g/m²
Dimensions (WxDxH)	284 x 99 x 77 mm
Power requirements	AC 100 - 240V, 50/ 60 Hz
Non-operating relative humidity (non-condensing)	20 - 80 %
Minimum RAM	512 MB
Minimum storage drive space	2197 MB
Sustainability certificates	ENERGY STAR
Power consumption (standby)	5 W
Power consumption (typical)	9 W
Operating temperature (T-T)	5 - 35 °C
Certification	RoHS

Weight and Dimensions

Depth	99 mm
Width	284 mm
Height	77 mm
Weight	1400 g