Fujitsu ScanSnap S1300 Safety Precautions

6
For ScanSnap S1500 or ScanSnap S1500M Users
Parts of the ScanSnap use magnets. Magnetic and IC cards should not come into contact with
these parts. Otherwise, the magnetic part of the card may be damaged.
For more details about the parts that use magnets, refer to the "Getting Started".
For ScanSnap S1300 Users
LED light source of this product is not exposed in normal use, and the intensity of LED light
emission does not pose any risk of eye damage. Do not disassemble, repair, or customize this
product by yourself. Direct exposure to the LED light source could cause problems with visual
acuity.
When you perform cleaning, make sure that the inside of the ScanSnap is free of any foreign
object, and be careful not to get your hand or the cloth caught on the pick spring (metal part)
as a deformed pick spring (metal part) may cause injury.

Fujitsu ScanSnap S1300 Specifications

General

Film scanning	No
Color scanning	Yes
Maximum scan size	216 x 360 mm
Scanner type	Sheet-fed scanner
Sensor type	CIS
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	10 sheets
USB version	2.0
Standard interfaces	USB 2.0
Scan media weight	64 - 104.7 g/m²
Dimensions (WxDxH)	284 x 99 x 77 mm
Power requirements	AC 100 - 240V, 50/ 60 Hz
Non-operating relative humidity (non-condensing)	20 - 80 %
Minimum RAM	512 MB
Minimum storage drive space	2197 MB
Sustainability certificates	ENERGY STAR
Power consumption (standby)	5 W
Power consumption (typical)	9 W
Operating temperature (T-T)	5 - 35 °C
Certification	RoHS

Weight and Dimensions

Depth	99 mm
Width	284 mm
Height	77 mm
Weight	1400 g