EasyManuals Logo
Home>Fujitsu>Scanner>ScanSnap S1500

Fujitsu ScanSnap S1500 User Manual

Fujitsu ScanSnap S1500
81 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #29 background imageLoading...
Page #29 background image
When ScanSnap Manager does not operate normally
29
Removing the ScanSnap's connection information
The ScanSnap might have been connected to the computer before you installed the software.
In that case, you need to remove the connection information of the ScanSnap. Remove the
ScanSnap's connection information in the following procedure.
1. Connect the ScanSnap to the computer, and open the ADF paper chute
(cover)/feed guide.
2. Open Device Manager.
z For Windows 7
Select [Start] menu [Control Panel] [Hardware and Sound] [Device
Manager].
z For Windows Vista
Select [Start] menu [Control Panel] [System and Maintenance] [Device
Manager].
z For Windows XP
Select [start] menu [Control Panel] [Performance and Maintenance]
[System] [Hardware] tab [Device Manager] button.
z For Windows 2000
Select [Start] menu [Setting] [Control Panel] [System] [Hardware] tab
[Device Manager] button.
3. Select [Imaging devices] and right-click on [ScanSnap XXXX] (or
[Imaging devices] [Other devices] [ScanSnap XXXX]), and then
select [Uninstall] from the displayed menu.
"XXXX" indicates the ScanSnap model that is connected.
4. If other USB ports have also been used to connect the ScanSnap,
perform steps 1. to 3. for all of them.
5. Close the ADF paper chute (cover)/feed guide to turn off the ScanSnap.
6. Unplug the USB cable from your computer.
ATTENTION
For S1300i and S1100, Windows 2000 is not supported.

Table of Contents

Other manuals for Fujitsu ScanSnap S1500

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu ScanSnap S1500 and is the answer not in the manual?

Fujitsu ScanSnap S1500 Specifications

General IconGeneral
Film scanningNo
Color scanningYes
Input color depth- bit
Maximum scan size216 x 360 mm
Scanner typeSheet-fed scanner
Sensor typeCCD
ISO A-series sizes (A0...A9)A4, A5, A6
ISO B-series sizes (B0...B9)B5, B6
Maximum ISO A-series paper sizeA4
Auto document feeder (ADF) input capacity50 sheets
Bundled softwareScanSnap Organizer V4.0, CardMinder V4.0, Adobe Acrobat 9 Standard, ABBYY FineReader
Scan media weight52 - 127 g/m²
Dimensions (WxDxH)292 x 159 x 158 mm
Power requirementsAC 100V to 240V, 50 / 60 Hz
Dimensions (W x D x H) (imperial)11.5 x 6.3 x 6.2 \
Sustainability certificatesENERGY STAR
Power consumption (standby)4.5 W
Power consumption (typical)35 W
Operating temperature (T-T)5 - 35 °C
Operating relative humidity (H-H)20 - 80 %
CertificationRoHS
Weight and Dimensions IconWeight and Dimensions
Weight3000 g

Related product manuals