Fujitsu ScanSnap S1500 User Manual

Installing in Mac OS
56
Installing in Mac OS
This section explains how to install the software in Mac OS.
■ System requirements
*1 : It is recommended to apply the latest updates to the Mac OS.
*2 : Not supported on S1300i.
Evernote for Mac is not supported for versions earlier than Mac OS X v10.5.8.
*3 : S1300i can be operated on Mac with Intel
®
Processor.
*4 : When using Mac OS X v10.7, you need to update to the latest version (3.0 or later) after you
installed Evernote for Mac.
*5 : Bundled with S1500M.
When using Mac OS X v10.7, you need to use an Adobe Acrobat version which supports Mac
OS X v10.7.
For information about the Adobe Acrobat versions officially supported on Mac OS X v10.7,
visit the website of Adobe Systems Incorporated.
*6 : When using a USB 3.0 port, data is transferred at the same speed as USB 2.0.
Operating system
(*1)
Mac OS X v10.7 Mac OS X v10.6 Mac OS X v10.5
Mac OS X v10.4
(*2)
CPU
(*3)
Intel
®
Core™ Duo 1.83 GHz or higher
(Recommended: Intel
®
Core™2 Duo 2.4 GHz or higher)
PowerPC
®
G5 1.6 GHz
Memory 2 GB or more 1 GB or more
512 MB or more
(Recommneded: 1 GB or more)
Display
resolution
1024 × 768 pixels or higher
Hard disk space
Disk space required to install the software bundled with the ScanSnap is as follows:
z ScanSnap Manager: 800 MB
z ABBYY FineReader for ScanSnap: 570 MB
z Cardiris: 130 MB
z Evernote for Mac (*4): 55 MB
z Adobe Acrobat 9 Pro (*5): 1540 MB
USB port (*6) USB2.0 / USB1.1
ATTENTION
z If the system requirements above are not satisfied, the ScanSnap may not operate.
z Do not use the USB port on the keyboard or the monitor to connect the ScanSnap (it may not function
properly).
z Make sure to use a powered hub equipped with an AC adapter if you are using a commercially
available USB hub.
z Scanning speed will slow down in the following cases:
- The CPU or the memory do not meet the required specifications
- The version of the USB port or the USB hub is USB 1.1
z A disk space approximately three times larger than the resulting scanned file size is required when
scanning documents.

Fujitsu ScanSnap S1500 Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	- bit
Maximum scan size	216 x 360 mm
Scanner type	Sheet-fed scanner
Sensor type	CCD
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	50 sheets
Bundled software	ScanSnap Organizer V4.0, CardMinder V4.0, Adobe Acrobat 9 Standard, ABBYY FineReader
Scan media weight	52 - 127 g/m²
Dimensions (WxDxH)	292 x 159 x 158 mm
Power requirements	AC 100V to 240V, 50 / 60 Hz
Dimensions (W x D x H) (imperial)	11.5 x 6.3 x 6.2 \
Sustainability certificates	ENERGY STAR
Power consumption (standby)	4.5 W
Power consumption (typical)	35 W
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Certification	RoHS

Weight and Dimensions

Weight	3000 g