Fusion MS-IP700i Manual&Nbsp;

19
Before you can use your media device as an input source you must first
connect the device to the FUSION stereo as described in the
installation section.
To listen to audio from your iPod, MTP device, Bluetooth device or USB
FLASH drive:
ANDROID (MTP) SUPPORT: MTP is a standard developed for connecting media (music) devices over
USB. It has been adopted on a number of platforms including Android. FUSION currently supports a
range of smartphones utilising MTP.
Refer to www.fusionelectronics.com for the latest list of support devices.
PLAYING MUSIC CONTENT
MS-IP700i
iPod
• PresstheiPodkey.TheiPodinputsourcescreenis
displayed. The most recently selected track starts
playing at the current play point.
• ToappearontheiPodsourcescreentheiPod
may be inserted either into the internal dock or
an external UNI-Dock or connected to the external
USB connector.
MS-AV700i,
MS-IP700i
Auxiliary
• PresstheAuxiliarykey.Keeppressingthekeyuntil
theiPod(MS-AV700ionly),USB,BluetoothorMTP
source screen is displayed.
4. Press any key to exit
Turning scan mode on
Scanmodeallowsthe700SeriestoscanthroughpresetVHFchannels,
looking for active channels.
Note: If the Squelch level is adjusted so that you can hear a constant hissing sound, the
unit will not scan correctly. To correct this, see “Minimizing background noise”, above.
To turn scan mode on:
1. Press the Menu key.
2. TurntheEncodertohighlighttheScan menu item.
3. PresstheEncodertoselectthecheckbox( ).Scanmodeisturnedonandthe
menu exits automatically.
Note: Pressing the Play / Pause, Forward or Rewind key turns scan mode off.

Fusion MS-IP700i Specifications

General

Brand	Fusion
Model	MS-IP700i
Category	Marine Audio
Language	English