Fusion MS-IP700i Manual&Nbsp;

24
LISTENING TO AUXILIARY INPUT
The 700 Series can accept audio input from a TV, games console, portable
player, computer, DVD player or any compatible device.
To listen to input from an auxiliary device:
CHANGING MTP SETTINGS
To change a setting in the MTP settings menu:
1. Press the Menu key while the MTP Source screen is displayed.
 2.TurnandthenpresstheRotaryEncodertoselectoneofthefollowing
settings to change.
•RepeatOn/Off.Repeatmodeisturnedon/off(notsupportedonalldevices)
•ShufeOn/Off.Randomplayshufeisturnedon/off(notsupportedonalldevices)
CHANGING BLUETOOTH SETTINGS
To change a setting in the Bluetooth settings menu:
1. Press the Menu key while the BT Source screen is displayed.
 2.TurnandthenpresstheRotaryEncodertoselectoneofthefollowing;
•ListofPairedBluetoothmediadevices.
To connect to an active device on the Paired Devices list rotate the rotary encoder
to select the device. Press the rotary encoder to tick the check box.
The device must be turned on, with Bluetooth on and not connected to another
Bluetooth device, otherwise it will not connect.
•DiscoverableOff/On.
EnablethisoptiontomaketheBT-200BluetoothmodulediscoverabletoBluetooth
media devices. Press the encoder to tick/untick the check box.
Note: To prevent interruption to audio streaming over Bluetooth it is recommended that
the Discoverable feature is turned off after pairing your device to the FUSION Stereo.
•RemoveDevices.
Select this option to display the current list of paired devices. Select the device to be
removed by rotating and pressing the rotary encoder.
AUXILIARY INPUT
Auxiliary
• PresstheAuxiliarykeytostepthoughtheavailable
sources.KeeppressingthekeyuntiltheAuxscreen
is displayed.

Fusion MS-IP700i Specifications

General

Brand	Fusion
Model	MS-IP700i
Category	Marine Audio
Language	English