Fusion MS-IP700i Manual&Nbsp;

31
DESCRIPTION COLOUR
Battery +12VDC Yellow
Accessory+12Vswitched  Red
Negative Ground Black
RemoteAmplierEnableouput  Blue/White
Dim input [12VDC active] Orange
Telemute input [GND active] Brown
Note: All +12V wiring MUST be fused at the power source end of your cable, with
a15Afuse.Whenthered“Accessory+12Vswitched”wireisnotrequiredinyour
installation,itMUSTbeconnectedtogetherwiththeYellow“Battery+12V”wireatthe
MS-700i head unit wiring loom.
When connecting the Dim input ensure the wire gauge used is suitable for the fuse
supplying the circuit being connected to.
ANTENNA CONNECTION
Connect an AM/FM marine antenna.
Note:DoNotConnecttoaVHFsplitter
AUX INPUT
ConnectanAuxiliarysourcetotheleftandrightRCA(White=L,Red=R).
VIDEO CONNECTION
(MS-IP700iiPod/iPhonevideoonly,MS-AV700iDVDvideoonly)
Connectthecompositevideooutput(Yellow=Video)toaTV/LCDmonitor
(MS-IP700iiPod/iPhonevideoisonlyavailableifdeviceisinsertedininternaldock).
USB CONNECTION
ConnectanApplesynccable(notincluded),orUSBFlashDrive(notincluded)or
connecttheMS-UNIDOCKPortableMediaDeviceDock(notincluded)
NMEA2000 / WIRED REMOTE
ForconnectiontoaMS-NRX200iRemote(notincluded).
ForconnectiontoanexistingNMEA2000BusaCAB000852DropCable(not
supplied)andCAB000581T-Connector(notsupplied)arerequired.
IMPORTANT NOTE:
1.TheCAB000851dropcablesuppliedwiththe700Seriesisrequiredforconnection
toaFUSIONRemoteControlNetwork(FRCN).
Note:FUSIONrecommendsupdatingallremote(s)softwareviatheMS-700iattime
of installation to ensure compatibility. This can be done via the Update menu. Please
refer to your remote manual for more information.
CONNECTIONS

Fusion MS-IP700i Specifications

General

Brand	Fusion
Model	MS-IP700i
Category	Marine Audio
Language	English