Fusion MS-IP700i Manual&Nbsp;

56
SiriusXM message:
‘Subscription
Updated’
A SiriusXM message informing you that you have either been granted access to
or unsubscribed from various channels.
For more information about your subscription:
• Online:Gotowww.siriusxm.com/subscriptions
• Phone:Call1-866-635-2349
SiriusXM message:
‘Channel xx
Unsubscribed’
• ContactSiriusXMtoupdateyoursubscription.
• Online:Gotowww.siriusxm.com/subscriptions
• Phone:Call1-866-635-2349
Problem Solution
Bluetooth
Why does my
FUSION Head Unit
not see my MS-
BT200 Bluetooth
Module?
If you have installed the MS-BT200 Bluetooth module or SiriusXM Tuner
(USAOnly)youwillneedtoenablethesource.Thisoperationwillbe
determined by the Tuner region you have selected.
Tuner Region - USA
When USA Tuner region is selected, press the menu button and select
Settings>Sources>AccessorythenselectthesourcetoenableSiriusXM
or Bluetooth.
Tuner Region - Australasia-Europe-Japan
In these Tuner regions once the MS-BT200 is installed and connected the
source will be available.
Why does my
Bluetooth source
not display all song
information
The availability of song information such as song title, artist name, track
duration and album cover artwork is dependent on the capability of your
phoneandmusicapplication.AlbumcoverartworkandShufe/Repeat
Status icons are not supported over Bluetooth.
My Bluetooth audio
is interrupted by
short breaks.
Bluetoothperformsbestwithline-of-sightoperation.Ensurethemusic
device is not covered or obstructed and is located near the Bluetooth
module. To prevent interruption to audio streaming over Bluetooth it is
recommended that the Discoverable feature is turned off after pairing your
device to the FUSION Stereo.

Fusion MS-IP700i Specifications

General

Brand	Fusion
Model	MS-IP700i
Category	Marine Audio
Language	English