Fusion MS-RA70 Quick Start Manual

Scanning for DAB Stations
Before you can scan for DAB stations, you must connect a compatible DAB
module and antenna (not included) to the stereo. Because DAB signals are
broadcast in select countries only, you must also set the tuner region to a
location where DAB signals are broadcast.
1 Select the DAB source.
2 Select~~~ to scan for available DAB stations.
When scanning is complete, the first available station in the first ensemble
found begins playing.
NOTE: After the first scan is complete, you can select~~~ again to re-scan for
DAB stations. When the re-scan is complete, the system starts playing the
first station in the ensemble you were listening to when you started the re-
scan.
Changing DAB Stations
1 Select the DAB source.
2 If necessary, select~~~ to scan for local DAB stations.
3 Select ......... or ~ ..... to change the station.
When you reach the end of the current ensemble, the stereo automatically
changes to the first available station in the next ensemble.
Adjusting the Volume
1 Use the dial to adjust the volume.
2 If necessary, press the dial to switch between zones.
TIP: To control all zones at the same time, press the dial until all zones are
highlighted.
Getting the Owner's Manual
You can get the latest owner's manual and translations of manuals from the web.
1 Go to www.fusionentertainment.com/marine.
2 Select your product.
3 Select Manuals & Downloads.
4 Select a manual.
Registering Your MS-RA70/MS-RA70N
Help us better support you by completing our online registration today.
• Go to www.fusionentertainment.com.
• Keep the original sales receipt, or a photocopy, in a safe place.
5

Fusion MS-RA70 Specifications

General

Brand	Fusion
Model	MS-RA70
Category	Marine Equipment
Language	English