18
GB
DANGER !
A
Cutting tool can cause injuries!
V When adjusting the cutting height, remove the
key and wear suitable work gloves.
The cutting height can be set to any
position between 12 mm and 42 mm.
1. Stand behind the cylinder mower
with one foot on the roller
M
.
2. Slacken the two locking screws
N
and set to the height required on
the scale
L
.
3. Tighten the two locking screws
N
on both sides to the same height.
The locking screws
N
must always be set to the same height on
both sides.
The mower may only be adjusted to a depth in which the lower
blade does not touch the ground when it is uneven.
v Assemble the grass catcher as described in the operating
instructions for the grass catcher and attach to the cylinder
lawnmower.
7. Putting into Storage
The storage location must be inaccessible to children.
1. Remove safety key.
2. Charge Accu.
3. Clean mower before storage.
4. Store mower in a dry place.
To save space, the cylinder mower can be folded up by folding
the clamping lever. Ensure the cable is not trapped during this
process.
The product must not be added to normal household waste. It
must be disposed of in line with local environmental regulations.
v Important: Make sure that the unit is disposed of via your
municipal recycling collection centre.
The GARDENA Accu Rechargeable Cylinder Lawnmower contains
lithium-ion batteries which must not be disposed of with normal
household waste at the end of their life.
Important:
Please return the lithium-ion batteries to your GARDENA dealer
or dispose of them properly at a public recycling centre.
1. Discharge lithium-ion cells.
2. Dispose of lithium-ion cells properly.
Adjusting the cutting height:
M
N
N
Mowing with the grass
catcher:
Disposal of
batteries:
Li-ion
Disposal:
(in accordance with
RL2002/96/EC)
Storage:
L
To Next Page
Loading...
Need help?
General
Weight and Dimensions
