Garmin aera 795/796 Quick Reference Guide
190-01194-01 Rev. A
32
Hazard Avoidance
OverviewGPS NavigationFlight PlanningHazard AvoidanceUtilitiesAppendixIndex
Enabling/Disabling terrain alerts:
1)
Touch the Terrain Icon.
2)
Touch the Menu Icon.
3)
Touch the 'Enable Alerts' or 'Disable Alerts' menu option.
4.3 TRAFFIC INFORMATION SERVICE (TIS)
NOTE: Refer to the aera 795/796 Pilot's Guide for information on configuring
TIS.
Adjusting TIS audio:
1)
From the Main Menu, touch Tools > Setup > Sound.
2)
Touch the Alerts buttons to select an alert volume (0-10).
Adjusting TIS settings on the navigation map:
1)
Touch Map > Menu > Set Up Map.
2)
Touch the buttons to select the Map Category.
3)
Touch the TIS Traffic buttons to select the desired settings ('Off',
'Auto', or range settings).
Displaying TIS information using the map pointer:
With traffic displayed on the Navigation Map, touch the desired TIS symbol
on the map. The traffic range and altitude separation are displayed.
TRAFFIC WARNING WINDOW
When a traffic threat is imminent, the Traffic Warning Window is shown. The Traffic
Warning Window shows a small pop-up thumbnail map in the lower left corner. The
Range Rings on the pop-up alert are spaced every whole mile/kilometer/nautical mile.
Touch the Traffic Warning Window to acknowledge and remove it.