26 nüvi 200 and 200W series owner’s manual
Appendix
NOTE: If you forget your PIN
and your security location,
you must send your nüvi to
Garmin to get it unlocked.
You must also send a valid
product registration or proof of
purchase.
Calibrating the Screen
If the touch screen is not responding
properly, calibrate the touch screen.
1. Turn off the nüvi.
2. Turn on the nüvi and hold
the Power key to the left for
about 30 seconds until the
calibration screen appears
(white screen with “Press
dot”).
Resetting Your nüvi
If your nüvi stops responding, turn
the nüvi off, and then turn it back on.
If this does not help, reset your nüvi.
Depending on your nüvi model, you
can reset your nüvi one of two ways:
Press and hold the Reset button
on the bottom of the nüvi for
several seconds.
CAUTION: Do not reset your
nüvi with a ballpoint pen or
other sharp object, which can
damage the unit or the battery.
If your nüvi does not have a
Reset button, slide the Power
key to the left and hold it for 8
seconds.
•
•
To Next Page
Loading...
Need help?
General