2 nüvi 200 and 200W series owner’s manual
Getting Started
WARNING: This product contains a lithium-ion battery. To prevent damage, remove the unit
from the vehicle when exiting or store it out of direct sunlight.
Before mounting the nüvi, see the product documentation for information about laws pertaining
to windshield mounting.
Step 1: Mount Your nüvi
1. Plug the vehicle power cable into the back of your nüvi.
2. Snap the cradle onto the suction cup arm.
3. Remove the clear plastic from the suction
cup. Clean and dry your windshield and the
suction cup with a lint-free cloth. Press the
suction cup rmly on the windshield.
4. Flip the lever back toward the windshield.
5. Fit the bottom of your nüvi into the cradle.
6. Tilt your nüvi back until it snaps into place.
7. Plug the other end of the vehicle power
cable into a power outlet in your vehicle.
Your unit should turn on automatically if it is
plugged in and the vehicle is running.
Lever
Suction cup mount
Cradle
Lever
Suction cup mount
Cradle
Vehicle power
cable
Vehicle power
cable
To Next Page
Loading...
Need help?
General