10
SETTING THE TIME/DAY
This setting allows you to set the current time and day for the Time/Day
stamp attached to each message.
HOUR
1. Press and hold the STOP/SET button for two seconds, then release to
access the set up menu. The unit announces, “Time (the current time
and day setting) To set hour, press next...press set to continue.”
2. To change the hour, press and release the NEXT or PREVIOUS button and
the unit announces an hour, such as “12am, 1am, 2am,” or “12am, 11pm,
10pm.”
3. After choosing the hour, press and release the STOP/SET button to store
the hour. The unit enters the Minute menu.
MINUTES
1. The unit announces, “(the current minutes setting) To set minutes, press
next...press set to continue.”
Time
Hour 12 a.m. - 11 p.m.
Minute 0 - 59
Day Sunday - Monday
Rings 2,3,4,5 toll saver
to Answer
Message time 1,2,3,4, minutes
Security 0 - 9, 0 - 9, 0 - 9
Code
Range of Settings
Default Settings
Time 12 a.m. Sunday
Rings to Answer 4
Message time 2
Security Code 123
To Next Page
Loading...
Need help?
General
