11
Using Your Remote
Controlling Combo Devices
Some Combo devices (e.g. TV/VCR, TV/DVD, DVD/
VCR, etc.) will require you to set up two different Mode
buttons to control both parts of the Combo device.
For example, if you have a TV/DVD Combo, you might
need to set up one code under the TV button to
control the TV part AND a separate code (under any
other Mode button) to control the DVD part.
For example:
For DVR/LIST press and release
SHIFT/SETUP then DVR/LIST subkey.
For DVD press and release
SHIFT/SETUP then B-RAY key.
For BACKLIGHT ON/OFF, press
and release SHIFT/SETUP then
BACKLIGHT subkey.
SPECIAL NOTE: Remote will stay in shift mode
until the SHIFT button is pressed again, or until 10
seconds of inactivity. The red indicator light will
blink when the remote is in shift mode.
Using SHIFT for Menu and Navigation
The SHIFT button allows access to more than one
function (labeled in blue) for certain buttons.
Use the SHIFT/SETUP button prior to accessing
the sub-functions (DVR/LIST, VOD, BACKLIGHT,
PAGE, etc.).
setup
To Next Page
Loading...
Need help?
General
