Otherfeatures ofyourZoneline.
Ventilation Control
The ventilation control lever is located at the
upper left side of file Zoneline unit, behind
file room cabinet.
When set at the closed position, only the air
inside the room is circulate(1 and fihered.
When set at the open position, some outdoor
nil-will be &-mvn into the room. This will
reduc( the heating or cooling dlicien_x.
Energy 77p:Keep the vent conn-ol at the closed
position. The room air will be filmrcd and
circulated.
NOTE:Twoshippingscrewsmustberemovedfromthe
ventdoorbeforeuse Seetbefl}stallation/nstructinns
in thebackofthismanua_
Open
position
Closed
position
ToRemove the Room Cabinet
Additionul ( ontrols arc lo(ut(d behind thu
l-OOln cabinet.
Toromove:Pull out at the bottom to rcleas( it
from the tabs (1). Then lift up (9).
To replace: Pla(( th( labs ov(r tile lop rail (l).
Push imvard at the bottom umil it snaps into
[)lace (2).
Air Direction
'Ib a(!iust the air direction, remo_e the room
cabinet. R_move lhe 7 louv_ r scruws that hold
the lomer insert in place. Flip lhe louvcr insert
180°, replace the screws and the room ca/)inet.
Louverscrews
Removethe room cabinet and flip the louver
insert to change the air direction.
Louverscrews
4
To Next Page
Loading...
Need help?
General
