GE CFE29TS User Manual

Fill Check Mode (continued)
• If the 30 sec. Delay Timer expires before the T & P switch is reactivated, the control turns off the RED LED around the T & P switch and the LCD screen will display
‘Setup Canceled’ for 3 seconds then go to the UI home screen.
• If the Maximum Fill Timer is expired while T & P switch is activated, the control turns off the RED LED around the T & P switch, isolation water valve, the Hot
Water valve and the LCD screen will display ‘Setup Canceled’ for 3 seconds then go to the refrigerator home screen.
• When the tanks is full the RED LED turns off, UI sounds a tone, the isolation & Hot Water valves are deactivated and the LCD screen will display ‘Complete’ for 3
seconds and run the Thermistor Check Mode.
• During the 3 seconds, if the consumer presses the Hot Water button, the control will display the ‘Hot Water’ screen, If ‘Cancel’ pad is pressed on the LCD screen
the during the filling operation the LCD screen will display ‘Setup Canceled’ for 3 seconds then go to the UI home screen.
37
Fill Mode Note: bypassed if tank is full (continued)
Cancel Screen any time
Cancel is pressed, time expires
or any system
error occurs
Turn and Push
(T & P) switch
Red LED
Solid or Pulses
Red knob LED off
Displayed for 3 seconds then to
‘Home Screen’.
Displays if a hot water system error occurs
RED Knob LED pulsing .
Time out 30 sec to ‘Setup Canceled’
Home Screen
RED Knob LED pulsing .
Time out 30 sec. to ‘Setup Canceled’
If knob is
released
Before filled
Release T&P switch
RED Knob LED on
Time out 30 sec to
‘Setup Canceled’

GE CFE29TS Specifications

General

Brand	GE
Model	CFE29TS
Category	Refrigerator
Language	English