34 35
The Face Detection mode will detect the faces
of persons in a photo so that the faces will be
as clear as possible.
1.In Shooting mode, press to enable Face
Detection.
2.Hold the camera securely, and point the
camera towards the subject to start the
face detection process. When the camera
detects a face, a white rectangular frame
will be drawn around the face. If no faces
can be detected, a circular frame will
appear on the LCD screen. (Note: For best
results, the face of the subject should be
relatively large on the LCD screen, and the
subject should be facing the camera as
front on as possible.)
3. Press
Shutter
halfway to focus on the
subject.
Face Detection
4. Press
Shutter
fully to capture the image.
To Next Page
Loading...
Need help?
General
