EasyManuals Logo
Home>GE>Ranges>EGR2000

GE EGR2000 User Manual

GE EGR2000
208 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #149 background imageLoading...
Page #149 background image
Before you call for service... GEAppliances.com
Troubleshooting Tips
Save time and money! Review the charts on the following
pages first and you may not need to call for service.
PossibleCa. e
Top burners do not light Plug on range is not completely
or do not burn evenly inserted in the electrical outlet.
Burner hole or slits on the sideof the burner may be clogged.
What To Do
Hake sure electrical plug is plugged into a live,properly
grounded outlet.
Removethe burners (on models with standard twin
burners)or burner heads and caps (on models with
sealed burners)and clean them with a sewing needle
or twist-tie. Hake sureyou do not enlarge the holes.
On sealed burner models,check and clean the electrode
area for burned-on food or grease.
Improper burner assembly. Hake sure the burner parts are installed correctly.
Seethe Careand cleaning of the range section.
Burner flames very Improper air to gas ratio. If range is connected to LPgas, contact the person
large oryellow who installed your range or made the conversion.
Surface burners light The oven gas shut-offvalve Tocheck the oven gas shut-off valve on sealed burner
may have accidentally been models,remove the warming drawer, storage drawer or
moved during cleaning or kick panel (seethe Care and cleaning of the range section)
moving, and lookfor the gas shut-off lever at the back of the range.
Lever is \
Sealed burner models
Tocheckthe ovengasshut-off valve on standardtwin burner
models,raisethe cooktop and lookfor the gas shut-off
leveratthe extreme rightrear corner.Followthe directionsin
boxA or Bthat match your regulator type.
Lever isshown closed. Lever isshown closed.
PULLTO O PEN./f'_'_..
Standard twin burner models Standard twin burner models
Control signalsafter
enterJng cooking time or
start time (onsomemodels)
Youforgot to enter a bake
temperature or cleaning time.
Touch the Bake pad and desiredtemperature
or the Self Clean pad and desired clean time.
Clock and timer Plug on range is not completely Hake sure electrical plug isplugged into a live,
do notwork inserted in the electrical outlet, properly grounded outlet.
(on some models)
A fuse in your home may be Replacethe fuse or reset the circuit breaker.
blown or thecircuit breaker
tripped.
Oven controlsimproperly set. Seethe Using the clock and timer section. 45

Other manuals for GE EGR2000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the GE EGR2000 and is the answer not in the manual?

GE EGR2000 Specifications

General IconGeneral
BrandGE
ModelEGR2000
CategoryRanges
LanguageEnglish

Related product manuals