Careand cleaning of the range.
Be sure aft controls are off and all surfaces are cool before cleaning any part of the range.
If your range is removed for cleaning, servicing or any reason, be sure the anti-tip
device is reengaged properly when the range is replaced. Failure to take this
precaution could result in tipping of the range and cause injury.
How to Remove Protective Shipping Film and Packaging Tape
Gareflllly grasp a corner of the protective
shipping fihn widl your fingers and slowly
peel it from d_e appliance surface. Do
not use any shaIp items to remove die
fihn. Remove all of the film before using
the appliance for the first time.
To assure no damage is done to file
finish of file product, file safest way to
remove the adhesive flom packaging
tape on new appliances is an application
of a household liquid dishwashing
detergent. Apply with a soft cloth and
aUow to soak.
NOTE:Theadhesivemustberemovedfromall
parts.It cannotberemovedif it is bakedon.
Control Knobs
Thecontrolknobs maybe removedfor easier
cleaning.
Make sure file knobs are in file OFF
positions and pull diem suaight off the
stems for cleaning.
The knobs can be cleaned in a
dishwasher or flley may also be washed
Mill soap and wateL Make sure the inside
of file knobs are dry before replacing.
Replace the knobs in the OFFposifion to
ensure proper placement.
Painted Surfaces
Painted surfaces include the sides of the
range and the doo_; top of conuol panel
and the d_wer flont. Glean these with
soap and wamr or a vinegar and wamr
solution.
Do not use commerciM oven cleaners,
cleaning powders, steel wool or harsh
able,sires on any pMnted surface.
Control Panel
It's a good idea to wipe the control panel
after each use of the oven. Use a damp
cloth m clean or rinse. For cleaning, use
mild soap and water or a 50/50 solution
ofvinegm and WamL For rinsing, use
clean wam_. Polish d_T with a soft cloth.
Do not use abrasNe cleansers, strong
liquid cleaners, plastic scoudng pads or
oven cleaners on the conuol panel--
they will damage the finish.
Oven Vent
Theoven vent islocatedbehind the right rear
surface unit.
This area could become hot dudng
oven use.
It is no_nM for steam to come out
of the vent, and moisture m W collect
underneath it when the oven is in use.
Theventis importantforproperaircirculation.
Neverbbck thisvent.
18
To Next Page
Loading...
Need help?
General
